Differences

This shows you the differences between two versions of the page.

--- tamiwiki:projects:5g [2024/02/16 11:02] – created yair
+++ tamiwiki:projects:5g [2024/02/16 14:06] (current) – [GL-X3000] yair
@@ Line 2: / Line 2: @@
 until we get fiber.... 5G is our option. ADSL took us this far.
+{{tamiwiki:projects:photo_2024-02-16_01-19-36.jpg?300}}
+@astra reports
+>I got just shy of a gigabit on a fold 4 at the entrance to Tami (inside, where the DSL modem is right now) and about 500mbits with an iPhone 15
+so that's the benchmark.
+in a conversation with our cell provider (02/15/2024), we extracted the following info.
+> Support for 5G will be in accordance with the frequencies supported by Pelephone:
+> Frequency 3700MHz-3800MHz in the frequency band Band N78
+> and with a bandwidth of 60MHz (soon a maximum bandwidth of 100MHz will be activated),
+> even if the specific model of the customer is not sold by Pelephone."
+----
 ==== GL-X3000 ====
@@ Line 18: / Line 32: @@
 === antenna drama ===
-the 6 antennas it came with where left on a random bed in a random hotel room in NYC...
+the 6 antennas it came with where left [1] on a random bed in a random hotel room in NYC...\\
+so we had to roll our own, [[https://www.ispreview.co.uk/talk/threads/diy-5g-antenna.40673/post-328424|the internet was not optimistic]], but YouTube rules.
+but before that we tried to connect without any antennas (carful) \\
+{{tamiwiki:projects:attami_no_anntenas.jpg?x300}}
+and with random antennas we found in Tami RF bins. \\
+{{tamiwiki:projects:just_bunch_of_random_antennas.jpg?x300}}
+{{tamiwiki:projects:just_bunch_of_random_antennas_resault.jpg?x300}}
+{{tamiwiki:projects:just_bunch_of_random_antennas_resault_speedtes.jpg?x300}}
+== 1st build ==
+(20/15/2024)\\
+enter the //5G Antenna 9db Gain by Andrew McNeil//
+{{youtube>klceEWWDMb0?}}
+Design files > {{tamiwiki:projects:5g_antenna_9db_gain_by_andrew_mcneil_.pdf}} - print 100% scale on A4 paper
+our Neighbours at [[https://maps.app.goo.gl/LyBvqf8SReKoHfYM6|BB jewelry store]] stock cheap brass sheets, the design calls for 0.5mm but they only had 0.4 and 0.6 mm.\\
+currently we used the 0.4 and also got nice scissors.
+{{tamiwiki:projects:photo_2024-02-15_19-04-07.jpg?200}}
+{{tamiwiki:projects:photo_2024-02-15_19-04-07_2_.jpg?200}}
+{{tamiwiki:projects:photo_2024-02-15_19-04-08.jpg?200}}
+{{tamiwiki:projects:photo_2024-02-15_21-06-18.jpg?200}}
+result \\
+{{tamiwiki:projects:photo_2024-02-15_21-26-04_3_.jpg}}\\
+{{tamiwiki:projects:photo_2024-02-15_21-26-04_2_.jpg?x300}}
+----
+==== media ===
+[1] \\ {{tamiwiki:projects:photo_2024-02-01_18-32-55.jpg?200}}
+[2] general images of the SMA pigtails from the GL-X3000\\
+{{tamiwiki:projects:photo_2024-02-01_23-13-39.jpg?300x}}
+{{tamiwiki:projects:photo_2024-02-15_16-01-01_2_.jpg?200x}}
+{{tamiwiki:projects:photo_2024-02-15_16-01-00.jpg?x200}}
+{{tamiwiki:projects:photo_2024-02-15_16-01-01.jpg?300x}}

TAMI - wiki

User Tools

Site Tools

Differences

Page Tools